Welcome to European Tribune. It's gone a bit quiet around here these days, but it's still going.
I'm not an expert, but my understanding is that net metering is a hassle for the electric company because of the need to manage the phase relationship between voltage and current. Basically, you're connecting into an extremely complicated (and somewhat fragile) system, and you have to do it correctly.

Phase control is measured by the "power factor," which should normally be close to 1. This is not an issue for the relatively small and simple loads that households normally put on the grid. Industrial customers must provide a load that is resistive, neither inductive nor capacitive, and they pay a penalty if this is not achieved. For example, if a factory has a lot of electric motors, it will have to pay a power factor penalty because they are not resistive loads.

If you're supplying electricity to the grid, you must follow the same rules--in reverse, sort of--and if you don't then the system gets messed up. So as I understand it, the issue for the electric company when net metering is used, is to make sure that the electricity supplied to the grid meets the phase requirements--plus a bunch of other rules. That's something that they normally don't need to worry about with residential customers, so it's an incremental burden on them.

Here is a list of rules that one utility requires you to follow. They're pretty complex, and "somebody" has to make sure, in a net metering environment, that they're being follwed.

by asdf on Sun Oct 23rd, 2005 at 08:20:29 PM EST
[ Parent ]
You're not an expert, but you sound like one.

A society committed to the notion that government is always bad will have bad government. And it doesn't have to be that way. — Paul Krugman
by Migeru (migeru at eurotrib dot com) on Mon Oct 24th, 2005 at 09:08:55 AM EST
[ Parent ]


Top Diaries

Occasional Series