The European Tribune is a forum for thoughtful dialogue of European and international issues. You are invited to post comments and your own articles.
Please REGISTER to post.
This means that after a certain point, mass is increasing relative to the added wind intercepted, limiting economies of scale. New materials can change the equation, i.e. when carbon fiber is added to the load carrying blade spars. Bard Engineering uses a very conventional turbine design for its offshore entry, where they simply scaled up standard 3-bladed geared turbines. Their blades weigh ca. 28 t, the hub alone including the entire pitch system is around 70t, and the full nacelle including power train reaches 280t.
I don't have the REpower 5m weights in front of me right now, but I believe the blades, at approx. the same length, weigh 9000 k less, because they have extensive use of carbon fibre in the load-carrying members, particularly in the spar girders. They will also be stiffer, meaning less glass as well. Then correspondingly less steel is needed in the hub, and along key parts of the power train.
Multibrid saves similar weight in their blades by carbon fibre use, though they add some aloft weight by using one less gearbox stage but a correspondingly larger lower speed generator system. Dinner (which i share cooking duties) calls.
Perhaps the blade, hub, nacelle, and total aloft weights are available on the net. Comparing and contrasting these machines are perfect examples of the design tradeoffs the design team has to make.
And we haven't even begun to discuss the 2 new second versions of the Enercon 6MW turbines erected in Emden.
"Life shrinks or expands in proportion to one's courage." - Ana´s Nin
From Wiki: For a given survivable wind speed, the mass of a turbine is approximately proportional to the cube of its blade-length. Wind power intercepted by the turbine is proportional to the square of its blade-length. The maximum blade-length of a turbine is limited by both the strength and stiffness of its material.
Do you have examples of actual blade dimensions and materials for wind turbines of different nominal power?
We have met the enemy, and he is us — Pogo
by Frank Schnittger - Jan 14 8 comments
by Oui - Jan 19 11 comments
by Oui - Jan 17
by ARGeezer - Jan 17 8 comments
by Oui - Jan 10 91 comments
by Oui - Jan 13 4 comments
by IdiotSavant - Jan 6 8 comments
by Oui - Jan 4 91 comments
by Oui - Jan 1911 comments
by Oui - Jan 17
by ARGeezer - Jan 178 comments
by Frank Schnittger - Jan 148 comments
by Oui - Jan 134 comments
by Oui - Jan 131 comment
by Oui - Jan 1091 comments
by Oui - Jan 931 comments
by Oui - Jan 812 comments
by IdiotSavant - Jan 68 comments
by Oui - Jan 6115 comments
by ARGeezer - Jan 541 comments
by Oui - Jan 491 comments
by Oui - Jan 382 comments
by Oui - Jan 211 comments
by Frank Schnittger - Dec 3118 comments
by Oui - Dec 2913 comments
by asdf - Dec 285 comments
by Oui - Dec 28
by Frank Schnittger - Dec 2612 comments