The European Tribune is a forum for thoughtful dialogue of European and international issues. You are invited to post comments and your own articles.
Please REGISTER to post.
Airwatt An airwatt or air watt is a unit of power very close to the watt which is used for various vacuum cleaning systems, such as vacuum cleaners. The airwatt is derived from English units. ASTM International defines the airwatt as 0.117354 * F * S, where F is the rate of air flow in ft3/m and S is the pressure in inches of water. This makes one airwatt equal to 0.9983 watts. The airwatt is useful measurement of vacuum power, since the power carried by a fluid flow (in the case of a typical house vacuum the fluid is air) is equal to pressure times volumetric flow rate. This could be a more useful figure than the electrical power drawn by the vacuum system's motor, since the efficiency of motor and vacuum systems varies.
An airwatt or air watt is a unit of power very close to the watt which is used for various vacuum cleaning systems, such as vacuum cleaners. The airwatt is derived from English units. ASTM International defines the airwatt as 0.117354 * F * S, where F is the rate of air flow in ft3/m and S is the pressure in inches of water. This makes one airwatt equal to 0.9983 watts.
The airwatt is useful measurement of vacuum power, since the power carried by a fluid flow (in the case of a typical house vacuum the fluid is air) is equal to pressure times volumetric flow rate. This could be a more useful figure than the electrical power drawn by the vacuum system's motor, since the efficiency of motor and vacuum systems varies.
If i understand correctly, this means that electric power is directly related to air flow = air speed. So if, you put a relevant rotor in the vacuum cleaner, you get 2000W. Should not be too difficult.
That's what windmills do. Large blades, big gearboxes. That's what makes them expensive. The generators themselves aren't, AFAIK, the main cost.
Hard to believe. Can a rotor and couple of gears rise price from 3e/MW to 80e/MW? I believe generator manufacturers are being screwed.
No you won't. With a pressure gradient on the order of tenths of atmosphere per meter, you get a considerable loss from friction. You'd be lucky to recover 200 W from a setup like that.
Hard to believe. Can a rotor and couple of gears rise price from 3e/MW to 80e/MW?
And a tower. And grid connection. And transformers. And installation. And output governors. And you're converting a pressure gradient into electricity, which is a lot harder than converting electricity into a pressure gradient.
- Jake Friends come and go. Enemies accumulate.
by gmoke - May 16
by gmoke - Apr 22 5 comments
by Frank Schnittger - Apr 23 3 comments
by gmoke - Apr 30
by Oui - May 20
by Oui - May 19
by Oui - May 1817 comments
by Oui - May 18
by Oui - May 1717 comments
by Oui - May 15
by Oui - May 1512 comments
by Oui - May 14
by Oui - May 136 comments
by gmoke - May 13
by Oui - May 1321 comments
by Oui - May 12
by Oui - May 119 comments
by Oui - May 111 comment
by Oui - May 109 comments
by Oui - May 10
by Oui - May 921 comments